How do I use the cleansing cycle and when do I use it?

Your new Bruvi® brewer MUST go through the cleansing cycle before brewing a B-Pod.

Instructions:

  1. Remove and rinse the water tank, fill with room temperature, filtered water to the maximum fill line, then reattach to the brewer.

  2. Be sure there is no B-Pod in the pod chamber and lower the handle.

  3. Place an 8 oz or larger mug on the drip tray.

  4. Plug the power cord into an electrical outlet.

  5. Press these three buttons in the following order: Hotter, 4oz, Start/Stop

  6. Once all the progress bars turn from white to green, the cleansing cycle is complete. You’re now ready to brew.

Screen_Shot_2021-09-02_at_11.50.28_AM.png

NOTE: You can STOP the cleansing cycle by pressing the Start/ Stop button, but you’ll have to repeat step 5 to complete the process.
 
WARNING: Be sure to use an 8 oz or larger mug to avoid spillage of hot water.

 

 

 

 

 

Was this information helpful?
0 out of 0 found this helpful
Have more questions? Submit a request