How do I fill up the water tank?

When the water level indicator blinks in blue, the water tank needs to be refilled.

There are two ways to fill the water tank.

1. You can leave the water tank in place, remove the cover and fill directly into the tank.
2. Or, remove the tank from the brewer and fill, then replace the cover. Either way, remember to only use room temperature filtered water.

To remove the water tank, pull up and away from the base of the brewer.

To reinsert the tank on the base, ensure the funnel under the tank engages with the drain at the base of the brewer.

Check that no water is leaking from the base of the water tank. If so, lift the tank again and dry the base, and reinsert, ensuring that the funnel is properly aligned with the drain.